Browsing this Thread:
1 Anonymous Users
|
|
Aluminum 1200 front race hubs - Datsun Comp USA |
|
Home away from home  
Joined:
2002/3/22 14:50
From St. Louis, MO USA
Group:
Registered Users
|
One pair of aluminum Datsun 1200 race hubs. One is new and one is slightly used. The used hub is fit with long 1/2" wheel studs.
These hubs fit the original 1200 struts with the small wheel bearings. Designed to used the Datsun 240Z brake rotor and caliper inside a 13" wheel. (Or you can use other rotors/calipers.) Hardened aluminum with black anodized coating. $200 USD for the pair, includes the new bearings and races (complete set).
Thanks, Peter
Best: PeterZekert [at] Juno [D0T] C0M
THREE 0NE F0UR 724 7 ZERO 98
Posted on: 2013/1/1 23:39
Edited by pjz on 2013/1/8 5:16:14
|
|
|
|
|
Re: Aluminum 1200 front race hubs - Datsun Comp USA |
|
Home away from home Joined:
2002/3/22 14:50
From St. Louis, MO USA
Group:
Registered Users
|
The outer race on the hub is 1.650 inch outside diameter.
The inner race of the hub is 2.045 inch outside diameter.
I measured the distance between the outside edge of the outer race to the inside edge of the inner race. About 2.350 inches.
Thanks, Peter
Posted on: 2013/1/3 0:56
Edited by pjz on 2013/1/4 21:39:03
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
1200 race hub.JPG (70.08 KB)
Transfer
