If any one is interested I have picked up some high quality KP (a Japanese brand), A series gasket sets cheap.

If you want a set or two,
A12 sets are $27.50 for a full rebuild set,
A14/A15 full rebuild sets are $55.
E13 to E16 sets are $55

Prices include GST. Add post charges or freight as required.

I only have 6 x A12, 5 x A14/A15 and 3 x E15 sets.

Is the difference between the A12 and A14 because they actually have the right head gasket in it with the larger bore size ?
I may need 1 or 2 as I'm going to tear the engine down again and swap the cam and get some valve reliefs done into the pistons.

I dont have a caliper handy but the bore size is 77.5mm or maybe 78mm. It suits at least a 1mm overbore on A14 or A15 then.

They were too good to leave at the price so I thought I would offer them on site so members got the benefit. I cant use that many sets

I will open a set a take a pic of the contents. and post it on the miscellanous section.

Put me down for 1. I'll think on the second one.
Not enough holes in the manifold gasket but nothing a hole punch won't fix.I don't use valve stem seals eaither but its a kit so I will put them in the "spares' box.

Sure you don't have any tasty 77mm flat top pistons and a nice cam to go with it ?

I will send the kit by post. PM me with address details.