Mine was f...ked, big time.
I bought the plastic bushes, but then realised that the g\stick pin at the bottom wasn't there except a bolt and nut jobby instead.
This pin had to be placed on order, and I had to wait a week before collecting it.
So what did I do?
Well, the bushes wouldnt work with the bolt and nut set up, so I cut a pice of rubber hose, fitted it in the stick at bottom, shoved it in and put the bolt & nutthrough,
Whallllah,no sloppiness

Thankyou Abyss, I can stop searching the rubbish bin for the packet and invoice now.

if you cant justify the cost, I have used a bit of garden hose before. not ideal, but it works.

I fixed mine by pressing a piece of tube in it. This virtually made it no slop.... I dont know if it was really good to have metal on metal but my A series gear boxes weren't holding up that long anyway :P

Quote:

32855-H1010 for the 2 bushes at the pivot point. $9 each +Gst

32861-N4200 for the bush at the end of the gear lever. $7 +gst

And just in case anyone wants it:

7496320900 is the rubber boot that covers it all. $20 + Gst

These prices are as of this morning when I picked mine up.

Thats cool...I stand corrected.
Whats the Nissan part #?

Quote:

I bought mine brand new from Nissan, although a little expensive at $25 for all three (Yep all three, there's one in the bottom of the selector hole)

ok thanks guys, just what I needed.
I'll be headed to my nearest nissan dealer then.

Yep, you can still buy them. They look like this:

Nissan Shifter Bushings

They are available on ebay or you could try your local nissan dealer