ok... i found the problem why my indicators werent working... the fuse box just needed a cleaning... so i got some sand paper and just gave the fuses and their clips a little bit of a touch up. now they are working all fine

as for the brakes, i hafnt come around to doing them. so i might ask Dattoman_1000 what he can do for me if he doesnt mind

also with the tyres which i got put onto my wheels, i got 175x70x13 sonars put onto them. my dad has had sonars on his EH station wagon for about 5 years and they are only just starting to wear away a little.

shaun

Im using the 13" wheels, and the wheels came with the correct nuts for them when i bought the car.

Quote:

ok ill be sure to ask him it wont hurt to get new things anyways

If it isnt the blinker can would there be anything else that could cause this problem??

thanks for your adive dodgeman

shaun

If you think that the master cylinder is suspect, then give Dattoman_1000 [Neil] a call. He is KB10 friendly & a brake specialist, so should be able to come up with a NEW master cylinder assembly, & it might even be at a 'mates rates' price if you ask nicely.
They are not all that expensive anyway.

Check the blinker can. These things are a bit fragile sometimes & they just roll over & die occasionally. It's under the dash near the steering column.

I think that you mean that you are using the 13" Stanza SSS wheels. The TRX rims are 15"
The 13" wheels should serve untill you find something else that you like.
These Stanza wheels are quite heavy as far as mag wheels go & this adds to the unsprung mass which doesn't help ride quality, but they should be OK for a while. Make sure that you get the right wheel nuts for them.

well i just got my car's brakes fixed, they still suck a little bit of air. we bled the brakes and it still was seeping air. would i need to bleed the master cylinder aswell? or buy a master cylinder kit?

also my indicators aren't working, ive checked the fuse box and everything seems ok... what else could cause this problem???

and on a final note, my 13" TRX rims are going on the little 1000 . just needed to use the 6mm spacers and its all good.

well ill keep yas posted on the update of my 1000 coupe

cheers
shaun