Hey dodgeman, Wow do you have the actuall manule scan or something? woudl love to get a hold of one for a intresting read. If any one has a manule for a B10 id love to buy it...

No rust! thats always good, dont forget to look under the carpets. Is it just a stock A12? Cause i hear you can do some pretty cool stuff to a A series.

I think it weights 615 Kg.... 1,356 Lb than again iam a Noob

Hi guys, first post here. originally on OZDAT.

Im buying B20 ute in about a week! It has a A12, 13" mags, drop tank, restoed intirior and NO RUST! well no structural rust that i could see anyway! He wants about $2500 for it.

Anything i should look out for? Any cheap mods to get more power/fun out of the little ute? How much do these things weigh? If the wagons are only like 750kg, the ute'll be half that!(hopefully) mmm fun in the wet!

I also have a 260Z that im slowly restoring.

Cheers

Hopefully, these will help. These are from a right drive book, but only the switch is diferent I believe.

Be very carefull with the water control valve. Sometimes these become stuck & forcing it will only break the knob or the shaft.
If it is stuck, it can be fixed, but it involves removing the heater & dismantling it. The control valve is a simple device that can be dismantled.
Once it has been striped & cleaned, you will need a lubricant used tor domestic water taps [faucets] & an 'O' ring & it's as good as new.

And vent dose what?

I'd imagine 'heat' and 'vent'

Cheers! you guy were right. It is a heater fan. I geuss everytime iv played with that switch the Vent flaps for the heater were always closed and the car was too loud for me to hear the fan at all.THANKS! I always thought the heater wasent every effective LOL Thanks again!

The thingys i can pulll to open the heater vent is labled "H" and "V" what do these stand for?
OMG LOL is the V one a window defroster!?!?!

Heater fan. make me wonder im goin to go try it but i dont think thats it.I have two Things i can pull and and out to open the heater i dont think there is a fan in there. let me get check

On that panel, my 1000 wagon has a switch for the heater fan - 1 speed and a push button for windscreen washer spray.

.Quote:

It's obviously where the original heater fan switch went, but what this switch was used for can only be determined
by you, as Josh said, by following the wire.

I checked all of my factory B10 workshop manuals, but no reference to LB10 models, so there must be a separate left-drive book.
Hmmmm, I wonder where one could be found,... in English. [that rules out Okinawa & Holland] The search begins.

If you send me a blank e-mail, to allow me to capture your e-mail address, I will send you the only LB10 wiring diagram that i have.
It might be of some hellp.
Click on the e-mail tab at the bottom of this post.

Looks like it's not a standard switch... someone added something at a later date and you can probably follow the wires to figure out what it does or did at one time.