digging up an old thread here, but, i need to know for sure what struts i have.
ive taken a part number off them and the only one i can see is : AS-1020-RH
the mob that makes em is called Armstrong Australia.
ive done quite a bit of searching, so i was hoping one of you part number gurus could help me out.

post a picture up for us of the strut and the brakes, im sure one of us will be able to tell you which model they are.

Some struts have part numbers on them. Do any of yours? post up the numbers, and I can tell you what car they come from.

yeh i had a look at those....ill see what i can come up with

not too sure, but how can i tell ?

Another method is the visual method. See Strut Photo Index.

Does your ute have non-1200 struts?

One method of identification is to remove one strut, & remove the shock from it & check the part number stamped into it. Go to that makers website & find the part number in the Nissan/Datsun listing.

You would really only need to check the 1200/120Y/Sunny listings at first, then the 1600/180B/200B listing as this would cover about 99.9% of strut conversions in drum braked 1200's in Australia.

This would be a measure of last resort, but it would work.

i am in the process of looking for new front shocks for my ute but before i go and buy anything i want to know which ones i have.

i have searched but cant find anything to help me identify the differnet types out there since i am not sure which ones kmy car has.

the ute has a disc brake front end with trx rims which dont scrub if that helps and it very low

any help would be appreciated.

thanks,
Ariel