mine must be wide rims :( = wont fit

i run 17's. and i did the same utheremate and cut a small section out. but i also run stanza struts with guards pumped slightly. check my profile for pics. its the blue ute. my yellow ute runs 16s with 120y struts- and with that little section cut out. only scrub when your backing out of a driveway. other than that theyre great.

you dont need to change struts you just need to cut away a bit of the frobnt of the guard (i used a peice of string from the center of the wheel (17" will bolt on straight but will not turn) with the string mark the same arc as at 11 oclock from the center of the wheel, continue that arc counter clockwise then cut away leaving 5mm to 8mm so that you are able to bend that 5mm to 8mm in under the guard

You will need to change struts. If you search you'll find more answers as this has been asked lots. Having flairs will help!

i put my 17 inch rims off my 180sx on they fitted on the rear s but hit the struts on the fronts :(

they look sic tho

hey guys jus wondering if there are any people here with 17'' rims and how much effort is required to fit rims this size. my car has flares so i have a bit of room to play with