I'll be away again for a few more days, but I'll see what I can do when I come back.

They come in sealed packs of four, & I also have new stock lifters stashed somewhere, so if possible, I will weigh a new pack & deduct a poofteenth for the plastic, then weigh four stockers. It won't take Einstein to divide the results by 4 to get a per unit weight.

Send me a PM to remind me in a weeks time if I haven't done it by then.

Quote:

Dodgeman - am still curious to hear the relative weights of the nismo lifters at some point when you get a chance (despite them being NLA).

Hi Guy's, I'll get back to you on the good bits available as soon as i can,
Bpro Japan is closed at the moment as they are relocating, I've been told 4 weeks from now so a bit of a wait..

cheers, Mike

Quote:
I have no idea what the weight difference is, all I know is that they are the bona-fide Nismo go-fast goodie.

I was encouraged to add them to my shopping list, so I placed an order with Mike. He eventually came back with a NLA reply. Oh well, too bad, life goes on, but a little later he wrote me to say that one last set had been discovered & did I still want them? The price, as you might understand, was not cheap but it was acceptable, so I got them.
It would seem that unless Nismo makes some more, they really are NLA now, so I guess that my luck held out just one more time.

Check with Mike to ensure that I am not spinnin' you a Furphy.

Mike, read your PM's & come back to me with the postage price again plus your relevant details so I can get you paid for that last bit.

I see NEW 5-speed box

hey that datsun 1000 key chain you have there looks cool.. can you get 1200 and 1600 ones
thats a nice collection you have there too..

hey mike how much for the double valve springs , seats and collars?

Quote:

Dodgeman - How much were the lifters? And what is the weight difference?

Well thanks to Mike, some more bits have shown up for me as well.

What we see here is
1. Flat top pistons in 78mm for my A13
2. Custom 'H' beam rods to suit.
3. Hollow Nismo lifters.
4. ARP main bearing studs, nuts & washers. [I don't like bolts in these high stress applications]
5. PitRoad bracket to mount the alternator on the left of the engine in the stck B10 or B110 position.

It's just another small step forward.

Ok, All these parts are available,

some of these ones in the pics, the owner has asked me to sell:

Tomei Pushrods (A14-15)
Billet Rocker Spacers (silver)
10k rpm Double Springs, Retainers, Seats and Collets.

if your keen for any of it, or other parts from Japan, drop me a PM, cheers, Mike