the following is a pic of the lower arm of a 510 known by you as a p510 don't know the signification of the p. sry.


if it has the same balljoint bolt setup as b310. it it the lenght that is not the same??? a pic of the balljoints is in the reply i ve posted before

You mean a 510 as in 68-73?? If so no it doesnt the p510 is only interchangeable with the p610 (180b) as far as I know.

but does a10 and 510 use the same arm and tention rod. can i share???

He is half correct, A10 is the later model 510 or in Australia called a stanza, this shares the same control arms/steering arms/castor rods as the b310. p510 is different.

but 510 and b310 or 210 have the same boltsetup into the ball joint. only that the b310's ball joint goes out a little like the one int the pic. am i right???




and if the lower arm is setable i thing it will perfectly go since u can adjust the lenght u want.

the only problem i see is the tension rod. im not sure about its lenght.

No, they do not.

The B310 has the same front suspension as the A10. In Japan and USA it is exactly the same, in Australia I hear they are different. But should bolt in if you use the set.

hey guys

i was wondering for a full adjustable front suspentions. does a 510/240 tention rod and lower arm go on a b310. i'm sure of the lower arm but the tention rod i'm not 100%

10x guys for all the help you give.