Nearly got all hard fuel feed and return lines mounted just used original fuel line as return, hard brake lines in the making. Pics to come not much to see under the car. Also got to make a line for charcoal cannister to tank. Might just use another original fuel line for that as well.

P.S The Coil Over kit I'm using is the quality ones that Supafatto (Nik) sells they weld on nicely. Thanks mate

HA HA Thats a coupe on the left and another future ute project on right. Then theres me ute thats ready for a blue slip sitting outside while i grind and weld in its parking space and of course this wagon my pride and joy. Oh theres a semi stripped coupe outside to with sections cut out of it and an Auto tunnel to come out for the other ute.

How many Dattos you got in there mate ? Looks cool

Got a start on one of the coilovers all welded on ready to sort out top hat and camber plate fitting. Should get away with standard inserts unless someone has a tip for shorter ones for unshortened R31 Struts.

Attach file:

---

  CoilOvers.JPG (198.85 KB)

Looks good and the rubber or foam will seal gaps and stop rattles.

Make sure you shroud sides of rad too. Forces air through rad and. intercooler.I noticed better temp stability in,mine through that alone

O.k made the plate for underside of RSP with all nuts welded to it and hit with some welding paint. Found a bit of aluminium angle to fit between radiator and lip of RSP. All fitted back up with some stainless Allen key bolts and washers she is as solid as a rock just going to round the corners of the Alloy angle and run a small rubber strip i have a long the edges so no vibration then a thin screw with rubber washer threw each Radiator bracket into it to hold it in place. Thinking i will polish the alloy angle right up once its all fitted and going back together. really happy phone pics not that clear but you get the idea. P.S you can kind of see the Scalloped X member in last pic.

Attach file:

---

  Radiator Mounting bar 1.JPG (199.03 KB)


  Radiator Mounting bar 2.JPG (198.30 KB)


  Radiator Progress 1.JPG (150.11 KB)


  Radiator Progress.JPG (196.56 KB)

I live for poxy phone pics, it's all I have for pics ATM.

Get that wagon rolling, it's good you didn't sell it and when you were I am broke as always. Id love a wagon too after seeing piggys done too

looking really good, makes me want a wagon now lol.

Thanks brother. Finished me top brackets poxy phone pics but really happy with them. The welds were some of my best yet taking gasless into consideration. Used the good old plates that go under the bolts for 120y crossmember.

Attach file:

---

  Radiator Brackets.JPG (125.15 KB)