chris i have a set of 1200 lowering blocks $50 and there yours new in box with u bolts n stuff

I remember i modded some 1200 lowering blocks for my old thou. Just drilled the hole out in the bottom and found the perfect spacer at home for the top to make it larger.

But back on the off topic 1200 ones are way too small for the gaylant unless i get some shims made or somthing. Pretty close to the 1000 specs tho!

Neil, the mitsu forums are #OOPS#! Thats why ive come to the datto forum for my Mopar needs! :P

Nah but from memory the 1200 ones ive seen were less complicated with just the straight up and down "lego" type connection as per beatties diagram about 10mm wide.
Re greendogs specs...shouldnt A=E and B=D or thereabouts?

Nice job Wurzel, do you have one for the 1200?

Nothing to do with galants far as I know but I thought while were on the subject...uploaded this a whiles back in case any 1k owners found it useful.

Wrong forums buddy
The Gaylant forums are over there >>>>

cheers buddy! your a champ!

a:12mm
b:@15mm
c:110mm
d:8mm
e:13mm
edit: width was 50mm also

Ok ive just picked up a bunky Galant runaround and need to drop it down a lil bit! So if anybody has some 1200 lowering blocks laying around can you measure em up for me to see if they are modifyable?

Have a look in the pic plus i need the width too!

Cheers guys!

Attach file:

---

  l block.JPG (17.14 KB)