Quote:
No one ever will ... sadly.

It's only a matter of time young feller me-lad, it's only a matter of time.

Quote:

I'll never get into the 1:23's at Oran Park like Chris was for a few years, and have yet to get close to his time at Wakefield. So I haven't really pegged him back too far, just given him a little competition and incentive to get the scabby coupe up and running.

Most people use Arias pistons. Because they are custom, there is no part number. You just call them tell them what you want. Call early Australia time, and it should be open business hours in USA.

I predicted it some time back & now it has come true, dat141 has managed to peg back 'The Boss' [of my local service station] & defeat him in open competition.

Now some of you know that 'The Boss' has pretty much owned the class with his A15 powered 1200 coupe for years & if Aiden can peg him back, then his A15 must be making some serious grunt.

If Aidens pistons are holding up under that sort of competition, [& some of The Boss' aren't] then they must be pretty good.

I have some 78mm A14 pistons for my A13 from the same source, so I have faith in them too.

Hey Kurt, try dundee1000 for some kameari pistons, I use them and although they're not forged they are of pretty good quality, haven't had any dramas with them yet.

hi guys im just finding trying to get 79mm pistons that are of deacent quality fast hard to come by, most people i talk too just tell me about custom made pistons as soon as i say nissan/datsun A15 engine with a 79mm bore so im just wondering what you guys are using and if possible where you got them from and a part number.
thanks for your help kurt