Browsing this Thread:
1 Anonymous Users
|
|
Re: Wheel Fitment Advice ( Calipers Rubbing) |
|
|
Guest_
|
dowa it rub? no thats fine then, if your woried you could grind it but why would you want too unless it does it.
as long as the wheel spins freely you are fine. just check around the entire rim to see if there are any casting marks or welds(if its a steel wheel)that may foul.
Ive been through this pain before too.
Posted on: 2010/4/6 22:20
|
|
|
|
|
Wheel Fitment Advice ( Calipers Rubbing) |
|
Home away from home  
Joined:
2005/10/12 0:34
From Canada, B.C , Richmond
Group:
Registered Users
|
=/
Well I found a set of 13in Slot Mags and tried fitting them last night only to find that the top of the front brake Caliper has very little clearance, only about one credit card thickness worth. Is this really unsafe? I've done some research and it seems that many people will grind the caliper down a tad to get some clearance.
Any advice?
Posted on: 2010/4/6 17:39
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
