aaaaaahhhhhh nice ,pig dog would you sell me one of your setups ? ,and how much ?

or to make it easier than searching for the pics
and i should probably mention that i used an r33 disc(296mm) and an r32 gtst/300zx TT caliper and 200b steering arms, as the disc will come pretty close to the balljoint with stanza or sunny steering arms


look here

and good bracket pics here

and bracket templates here

and the finished setup




with that setup i actually lathed the disc down to 292mm so that the caliper could sit in a little further to clear TRX rims. and im now running r30 Ti rims and they would have cleared fine with a full sized disc. also had r31 Ti mags on and they also clear nicely. all of which are 15 inch rims

or you use the stanza hubs and then just make up a caliper bracket. got mine to fit under 15 inch wheels ater trimming 3mm off the diameter of the disc so the caliper could sit a little further in, then changed wheels(still 15s) and the stock size would have fitted easy

have a look through my pics and you will find many helpful images

We now do a R32/R33 brake kit to suit Stanza/200B with the option for a 4 or 5 stud hub. The hubs are 6061 Ally and very light, and have a hub face the same as Stanza/200B.
They are not on our web site yet, but jive us a call for more details.

www.maddat.com.au

Scott

anything is possible but it will most likly be custom made . eg new hub (4 or 5 stud?) caliper adaptor plate , and may be wheel spacers and or bearing spacers , i need to know exactly what parts you want to use.

Like a maddat kit or something? I'm sure I've seen one that listed skyline parts. Mabey it was on datsport or Feral Errols' site? also please don't get talked into chromies, they're heavy

hey i need to know if there a way to put R32 ,3 0r 4 skyline brakes on stanza struts ,and is there an off the shelf kit ?
it is for a track car so it doesnt have to be engineered

any help would be great

oh and im chasing some second hand 17s that will fit a dattos ,anything with 5 spokes !!