|
|
Browsing this Thread:
1 Anonymous Users
|
|
Re: CA X member thickness ? |
|
No life (a.k.a. DattoMaster)  
Joined:
2007/12/20 23:37
From Nyngan, nsw Australia
Group:
Registered Users
|
i used 4mm plate,...lot of mucking around if you dont have another x-member to size up to...i used a 1200 auto tunnel (see my build for pics)
Posted on: 2010/4/25 5:45
|
_________________
living is good,.....  
|
|
|
Re: CA X member thickness ? |
|
Home away from home  
Joined:
2009/10/10 4:23
From Logan, QLD
Group:
Registered Users
|
keen for pics aswell :). I was planning on using the maddat kit as they came with a swaybar for around $600, but now they don't come with the swaybar i can't see the value in it at all when i am a competent welder, not paying $540 for 2 plates welded on.
I assume its just an upside down v shaped plate welded to the crossmember on both sides.
Posted on: 2010/4/25 0:50
|
|
|
|
|
Re: CA X member thickness ? |
|
No life (a.k.a. DattoMaster) 
Joined:
2009/8/26 6:58
From mandurah
Group:
Registered Users
|
i got 5mm plate today and messured up the brackets ,then i marked a line and put a slit in the plate and bent it to form the mount ,now i just need to weld the bend on the mount and then weld them onto the Xmember ,and then the fun will begin !!
oh and how far back will the shifter hole need to be cut in the floor
and will the CA box fit straight into a auto 1200 tunnel ? will i need to massage the back of the tunnel ?
as soon as i get the mounts welded im getting a tail shaft ,then i need to sort out the fuel and brakes :)
pics up tommorrow !
Posted on: 2010/4/23 13:15
|
|
_________________
77 1200 ute
77mm bore a15 ,12:1 comp
ported and reconed h89 head
fairly aggro cam ,billet rocker spacers
twin 40mm solex carbs on bpro manifold
MSD 6al2 with 2 step limiter
4speed 60a box
hd clutch
2 inch exhaust
locked 4:11 ute diff
...
|
|
|
Re: CA X member thickness ? |
|
No life (a.k.a. DattoMaster) 
Joined:
2008/6/2 10:46
From hastings,vic
Group:
Registered Users
|
i used 3 mm on the race car
Posted on: 2010/4/23 0:26
|
|
_________________
taking up room at home
3 now 2 1200 sedans,3 now 2 1200 coupes,3 now 2 1200 utes
1 1000 wagon,2 s13 silvia's,tranzit tray
hzj75 cruzer tray(for sale)
and allways changing
|
|
|
Re: CA X member thickness ? |
|
No life (a.k.a. DattoMaster) Joined:
2009/8/26 6:58
From mandurah
Group:
Registered Users
|
oh its not goin in a street car ,ok so 4 mm should do the trick
cheers tommo !
Posted on: 2010/4/22 14:54
|
|
_________________
77 1200 ute
77mm bore a15 ,12:1 comp
ported and reconed h89 head
fairly aggro cam ,billet rocker spacers
twin 40mm solex carbs on bpro manifold
MSD 6al2 with 2 step limiter
4speed 60a box
hd clutch
2 inch exhaust
locked 4:11 ute diff
...
|
|
|
Re: CA X member thickness ? |
|
No life (a.k.a. DattoMaster) Joined:
2008/6/2 10:46
From hastings,vic
Group:
Registered Users
|
i would go 4 mm
thicker the better to pass
Posted on: 2010/4/22 14:44
|
|
_________________
taking up room at home
3 now 2 1200 sedans,3 now 2 1200 coupes,3 now 2 1200 utes
1 1000 wagon,2 s13 silvia's,tranzit tray
hzj75 cruzer tray(for sale)
and allways changing
|
|
|
CA X member thickness ? |
|
No life (a.k.a. DattoMaster) Joined:
2009/8/26 6:58
From mandurah
Group:
Registered Users
|
does anyone know how thick the new engine mounts should be 3,4 mm ?
Posted on: 2010/4/22 14:35
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
Transfer
