you will also need the a15 head gasket

thanx for all your help

Quote:Why, did you think Dundee1000 was telling fibs?
The A15 head will work directly on any of the 1974 & later engines. These can be readily identified by the distributor that is under the No. 3 spark plug.

The earlier A12/1200 engines with a distributor under No. 1 spark plug will require a mod to the head before the later heads can be used on them.

You will need the manifold that matches the manifold mounting stud pattern & the port shape.
Round port A12 inlet manifolds will not fit at all.
Round port A14 'economy' model manifolds will fit but the round port manifold negates the benifit of the oval port head.
Oval port manifolds will fit & work as intended.

Sorry, only if you have a round port manifold!

so it will bolt straight on? and why do i have to change manifold

No prob's, need to change your inlet manifold though!

anyone else?

Tech Wiki on the left <---- is your friend...

yes..

it came out of an 82 1200 ute the a12 so does it fit? thanx