Im not liking the price differences, Id prefer a HD 200m clutch for 180aud
especially for a datsun 1000 which is much lighter and the owners foot has less lead in it :)

no D i mean CA clutch on L series flywheel, CA would kill an L series clutch in seconds(maybe minutes)
CA pressure plates are over a thousand kgs of clamping pressure. a good L series one might be half that. 4agze ones are only like 750kg
and all 4 cylinder clutches are 200mm, apart from 720 and z18et

nick, no you cant use an L16 clutch plate with CA pressure plate, the L16 is 200mm. need a 6 cylinder clutch plate

can i use a l16 clutch plate with a ca pressure plate??

+1 for the extreme clutch. Except mine was the organic heavy duty version. Personally i havent found it wanting in any area actually

I've got ana Extreme clutch aswell with my CA18. It was recommended to me and although it has been in the car for a bit over a years worth of driving it's been through numerous 'spirited' stints and a theft and it's still perfect.

Good point tip there Nick,
You mean CA flywheel drilled to take L series pressure plate pattern right?
Is there a 200mm HD clutch? Im thinking of using a smaller gearbox modded
by Simon maybe a 60 series L series 1600 box

im using a second hand extreme HD 5 puck in mine, seemed to work just fine
L series slave will work fine on the CA box, used the same hydro clutch setup for my L series and CA

CA is the same size clutch plate an L series 6 cylinder, 225mm
pressure plates have different bolt patterns, you could redrill an L series flywheel to CA pressure plate pattern if you really wanted to. then you could get really good clutches...that are also really expensive

an excedy HD clutch for an L series is about $180, for a CA its like $500-700

hi ppl was wondering if anyone know of any good clutches for a ca18det??
also if anyone knows if l series master and slave will be ok to use on a stumpy r30 on a ca18 bellhousing??
also some info about l series and ca18 clutch plate if they rar the same size and the pressure plate if u can swap between the 2??

thanks nick