What are the differences? What are the numbers on the two different types?

EDIT: the non-emission idle jet holders should have holes both above and below the threaded section so those pics look like an emission type?
See here for normal type: http://www.dellorto.co.uk/merchandise/large_image.asp?PartID=5739

I have a couple of spares but there are two different types.

Champion.. That'll do it!

Thanks heaps!

Is this what your after?

Attach file:

---

  Idle jet assy 1.JPG (103.84 KB)


  Idle jet assy 2.JPG (99.17 KB)

Catching fire! Thats not great!

Hopefully these won't do that to me after I have finished drilling holes everywhere..

could come look through my spares, chirnside, is that the standard carb or another?, ive never mezmarized those funny carby letters?

pm me to organise a visit

[edit] i googled it, they are twin delortos, hmm i have a set of twin sides but cant remeber if they are weber or delorto, just that they catch fire

Cool Dean.

Going round to Sean's this week to drop of some parts, let me know if you want me to ask him cheers.

Thanks Levey.

Just a pic lengthwise of the idle jet assy next to a ruler with mm scale should be all I need.

I want to make sure the threads are in the same place as the emission ones before I fill the old pre-sized air bleeds in the carb body jet stack and re-drill them lower to below the thread.

I can take some more pics if you need but as for parts I had to give most of those back, I still have have some though.

Or even a good close up photo of a non-emission idle jet holder next to a ruler with a millimeter scale.

Got some JB Weld and itching to have a go!