Sprung centre cushioned ceramic plate
200mm Toyota cover heavy duty Exedy

Thats what I use

do u have part numbers and a phone number mate?? cheers..

noted!!!

Your A15 may be putting out more torque than the stock clutch is designed for. But first verify that there is 5mm play at the clutch level coming out of the transmission. If there is no play, it can cause slipping.

Nismo sells a heavy duty clutch for A-series.

me nubies got a question too...

my A15 is doing a 130hp on flywheel and im using stocked A15 clutch set and A12 5speed gearbox and its slipping too starting at 5000rpm to 8000rpm...

can anyone share with me what clutch set is good to modify or is there any just plug and play...

Is there freeplay in the clutch cable/pedal?

What are the fingers on the pressure plate like? They should be flat when the pressure plate and friction disc is torqued down to the flywheel.
If they are sticking out a bit, the disc is too thin and it won't be clamping as much as it should.
If they are sticking in, the disc is too thick.

Is it adjusted for a 180b clutch or a 1200 clutch?

If thats a pic of your little yellow car. I think its a beast! Got nothing to ad with your clutch problems tho... sorry

what box is it and what thrust bearing u using as there are a few differant length thrusts

yeah guys its all been installed cleanly and properly im a qualified mechanic and yeahh.. umm at its got a 180b pressure plate with watever clutch suits this and slips like crazy and is adjusted properly