Hi DD

Yes It has , It was not working have to make it

thanks
regards
sumith

looks good. It has air conditioning too?

Hi Guys

Some of the Updates on the week end

thanks
regards
sumith

Attach file:

---

  1.jpg (79.46 KB)


  2.jpg (82.76 KB)


  3.jpg (82.69 KB)


  4.jpg (82.86 KB)


  5.jpg (84.09 KB)


  6.jpg (75.45 KB)

Looks good

Hi Guys

After a long time back on the project , Just had a color code on air cleaner and rocker cover an top grille, happy the way it came for the sunshine it is bright an when dark it looks gloomy

thanks
regards
sumith

Attach file:

---

  DSC03909.JPG (158.86 KB)


  DSC03913.JPG (156.24 KB)


  DSC03914.JPG (156.83 KB)

looks like a major job ...

Hi Guys

Few Updates on last week end stuff

Attach file:

---

  1.jpg (63.28 KB)


  2.jpg (67.69 KB)


  3.jpg (66.83 KB)


  4.jpg (70.66 KB)


  5.jpg (48.04 KB)


  6.jpg (71.08 KB)


  7.jpg (73.86 KB)


  8.jpg (50.63 KB)


  9.jpg (69.71 KB)


  10.jpg (68.54 KB)

Hi Guys

Reassembled the Starter Motor Cleaned the stator and armature and will be installing a new set of brush set soon,and found viper motor was in good condition i used it sparingly it used to stuck the moving arms always

and reassembled the carburetor with rebuild kit with factory specs jets.

Had to put little putty on minor scratches found on the behind and behind doors together and wet sanded them to the smoothest possible,found that the filler primer was not enough thick to keep it strong enough when sanding and found my gun tip was smaller than paint manufactures specs ,no problem there will be another complete filler coat later on,so had to put a little oil primer on those areas to avoid them get rust by next week end

thanks
regards
sumith

Attach file:

---

  1.jpg (68.59 KB)


  2.jpg (72.47 KB)


  3.jpg (66.14 KB)


  4.jpg (65.88 KB)


  5.jpg (54.65 KB)


  6.jpg (64.63 KB)


  6.jpg (64.63 KB)


  7.jpg (76.67 KB)


  8.jpg (76.63 KB)


  9.jpg (64.77 KB)


  10.jpg (50.49 KB)


  11.jpg (64.54 KB)


  12.jpg (50.49 KB)


  13.jpg (58.58 KB)


  14.jpg (60.02 KB)

Hi Guys

In which stage should i start to assemble my car parts like

Windscreens
Door Glasses
rubber beedings
door locks
winders
door handles
engine gearbox etc


1. after the primer coat
2.After the base coat
3.after the top coat
4.after the clear coat

right at the moment mine is on the completion of first epoxy primer coat

thanks
regards
sumith

Hi Guys

Just Bought Brand New Ignition Coil,Plug wire Set ,Ignition Condenser,Spark Plugs ,Carburetor Repair Kit,rotor etc needed for the engine.

thanks
regards
sumith

Attach file:

---

  4.jpg (67.33 KB)