innergaurd sound gaurd is the product 2 use its sound deadener and it looks good cost about $40 to do all 4 inner gaurds

pics to show ?

I mean inner guards in general.. ie around the wheel arches etc :) i ended up 2 pac black the lot. seam sealed it all and did it right the first time :)

if you use two part epoxy it'll be much stronger & chip resistant then regular 2K black paint, 3M makes a product called Schutz that worked pretty good....

http://www.shop3m.com/60455047294.html

you could also use a sound deading coating like Lizard Skin or something similar & just roll it on but I'd make sure its meant to move a bit - i.e. flexible somewhat

by "inner guards" do you mean the wheel wells (wheelhouse), or do you mean the inside of the guards?

i saw a build on here and a guy primed, stoneguard then 2 pac gloss black over that and he was a spray painter i think evilbetty was his username

I've always used the term 'stoneguard'.

I'm not sure exactly what that means...but it's general painters language.

Yeh.... Will just 2 PAC black it for now then
Get some under body stuff and paint over that aswell.

the obnly problem you will have is all the stone chips you will get....thats why they put that black crap on so stop all thos dents and scratches, sure if it aint gonna be driven but i know you will drive it bailz plus you never really look in there anyway

I am going for shiny, was Gunna paint them white... Changed my mind after cleaning all black #OOPS# outta the inner guards... :(