32/36 vs 1.75 su - Simon will have to back to his roots
with all these non ecu retro setups :)

Simon, with all the poking you do in so many areas
not to mention the energy or lighting in ya rear
Poking + Simon = Pokemon or maybe both Sirat Pokemon :))

D - I'm just running a single downdraft 32/36 carb - keen to get the fueling right.

Ha, Yes, ive been called Sirat a bit already.

So Simon does this mean a name change?

Siball, Ballamon, Siaratt.......tat?

Sorry for the breif interuption, normal transmission will resume with the next post.

D, Welders are in Ballarat. Machines are still in Kyneton. Its a bit hard if you want both on the same day. I dont get back to Kyneton much at the mo. I want to get them to Ballarat asap, but have to fix the concrete in the shed first.
I`ll let you know when im going to Kyn again.

Ben what carbs you tuning?

Ill be finishing my manifold end of next week I hope
C shaped Arc welds are getting better but alot of work.
Its old school looking all very smoot and as equal length
as possible hopefully I can get it cast in alloy if any
interest from the morry people or turbo A series fellas.
Then need to finish the bomber style exhaust another week.

Simon any chance of some machining at Kyneton?
need tigging of brackets for front alloy bumperettes.

Probably too much standing around for one of you if you were to come on the same day. It wouldnt bother me either way tho.

Im guessing you both wont have your cars finished at the same time. Just let me know when either of you is ready.

Just send me a PM.

Hey D i'd be ready in a month or so to go up for some carby work....don't know if it's easier if there is too of us?

What do you think Simon?

Needles got quite a few but Im no junky :)

Yes. might be a bit of fiddling if i have to source needles or machine yours a touch. But should be ok. If you have spare needles bring them too.