User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Re: please explain how to read timing from the timing cover :)
Home away from home
Joined:
2011/2/12 10:31
From vic
Group:
Registered Users
Posts: 649
Offline
hi i checked the pump and fuel levels and all are fine im going to reset the mixture to 2 turns out and idle to just 1 turn from contact on throttle and try again to tune it and see how it goes!

Thanks!

Posted on: 2011/10/7 2:23
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Not too shy to talk
Joined:
2011/1/20 10:49
From Dub-Ya Aye
Group:
Registered Users
Posts: 24
Offline
ball bearing at bottom of accel pump not sticking is it, or the needle sticking?

Posted on: 2011/10/6 16:09
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Quite a regular
Joined:
2010/2/22 20:28
From Vanderbijlpark.South africa
Group:
Registered Users
Posts: 61
Offline
Hi,
I have exactly the same problem with my A12, but got a little familiar with the hesitation, sometimes i get the idea that the petrol you get these days isn't what it's supposed to be.
I also run my ignition timing more advanced than what the manual says +/- 15deg.

Posted on: 2011/10/6 13:51
_________________
1976 120Y ute (Daily)
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Home away from home
Joined:
2011/2/12 10:31
From vic
Group:
Registered Users
Posts: 649
Offline
hi,
yer it revs very clean and nice in nuetral but in drive off idle it like dies and pick up then revs normal somtimes it dosnt fully dies just sputters!

and yes it points dizzy set at dwell 48!

Thanks!

Posted on: 2011/10/6 13:17
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Not too shy to talk
Joined:
2011/1/20 10:49
From Dub-Ya Aye
Group:
Registered Users
Posts: 24
Offline
Do you mean by "hesitation off idle" that when in neutral, idling and you jab the gas pedal, it dies for a split second, then revs out?
Or, when you jab the gas pedal, it splutters, then revs out?

U still got points dizzy?

Posted on: 2011/10/6 13:05
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Home away from home
Joined:
2010/4/13 9:22
From Malaysia
Group:
Registered Users
Posts: 579
Offline
there should be no hesitation anywhere. A is a very smooth engine

Posted on: 2011/10/6 7:36
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Home away from home
Joined:
2011/2/12 10:31
From vic
Group:
Registered Users
Posts: 649
Offline
ohh sorry guys i meant to say $95 hour on dyno and $70 tune without dyno which i have already got done but didnt help the hesitation problems!

so one question is most people out thier driving thier datsuns with no hesitation at all off idle? i came to think it was a stock hitachi thing ?

Thanks!

Posted on: 2011/10/6 6:57
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Home away from home
Joined:
2008/12/4 1:04
From Sydney, Australia
Group:
Registered Users
Posts: 648
Offline
$70 is cheap labour for anything these days. And most timing lights should be adjustable so can measure timing when it advances/retards.

Posted on: 2011/10/6 6:54
_________________
B110 sedan
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
Home away from home
Joined:
2011/2/12 10:31
From vic
Group:
Registered Users
Posts: 649
Offline
I took it to 2 mechanics and they were lost aswell they hooked up a fuel mixture gauge in the exhaust and played with timing and fuel mixture and the hesitation still is thier!

Sikyne did offer for a dyno tune but he lives preety far away from me and I havn't got the time at the moment due to coming up vce exams!

i might have to end up taking it to a tuner!

anyone you know close to dandenong that is good at tuning carburettors and this kind of stuff?

Thanks!

Posted on: 2011/10/6 6:53
Transfer the post to other applications Transfer


Re: please explain how to read timing from the timing cover :)
No life (a.k.a. DattoMaster)
Joined:
2007/1/22 23:06
From East New Britain, Papua New Guinea
Group:
Registered Users
Posts: 6981
Offline
By the way $70.00 is really good I think, you should seriously consider that, $210.00 to solve your, 3-4 month long problem is a good deal I reckon.

Last time I inquired to get my car tuned it was $350.00 from the word go, then there was a charge for every hour after the first. All jetting and associated costs were also charged to me.

Posted on: 2011/10/6 6:50
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]