Yes I did see it sometime ago,pretty impressive. Have you got yours running yet?
If you get 10 people wanting Nissan rocker covers for the Mazda head I'll make them for you.

Ahhh then awesome! However if you go the twin cam... one more thing,
have you seen Robs twin cam kit?
The narrow valve Z series mazda head can also be used, Rob used the
wide angle head but the later Z head is like a bike head and would
just need some nissan rocker covers

Will be slow progress on this but will happen eventually I hope!

D you never cease to amaze me. I have seen all of the Koenigsegg stuff on the net a while ago. The idea of this is not to recreate the wheel. I plan on doing this for nostalgic reasons.

I think it wouldnt hurt to look at
https://www.youtube.com/watch?v=Bch5B23_pu0

http://www.f1technical.net/forum/viewtopic.php?f=11&t=14743

Wouldnt hurt to contact Koenigsegg and ask to use his design
and software for testing purposes for their work and also
some commission to him for using them on a datto A series.
The camless design head would make the A series even smaller
more compact, more powerful and more efficient than any head

just in case you missed it also there is a Mazda head kit available
from Rob that is very affordable for twin cam 16v setup that rocks

Hmmmm, they toys.... Wonder what else he can make... tee hee...

first of all nice work.I've been watching this and it's super.like the idea of the nissan head and i was wondering why nobody made use of the pics of the head which are floating around as you put it.So you have been working quietly --Good -- Geez just cancel the travelling LOL -- want to see this done. All the best i'll be watching

I haven't done much work on this for a while. Will probably be a couple of years before I am able to get my teeth into it properly because I am off travelling soon. Was in contact some time ago with a company in the UK that do can do the patterns for me once I am ready.

I have a 3d printed assembly of the rocker gear, valves, light springs and slice of a head that I want to bolt to a block and turn it over by hand etc.

wow. Just wow.

Hi Bede,

How is your design coming on? Came across this thread by accident and wondered how you were going with it?

Hi Clyons8 I will flick you a PM. I have been mucking around with a 8v crossflow design off those old prints that are floating around of the AY12.

Attach file:

---

  Capture5.PNG (62.15 KB)


  Capture8.PNG (27.77 KB)


  Capture7.PNG (24.58 KB)