Boydyrs,
He clearly states to contact him via email in the add. He may not respond to a PM.

I´m intrested in most of the parts, can I get to you by mail and agree the shiping and payment?

My mail

rpfassis@sapo.pt

Regards

Roger

Hi Peter, sent you PM re parts......very interested in all parts
can you respond pls?
Boydyrs

Email, PM sent.

I am moving the shop, so I am selling parts rather than moving them.....

Set of (4) A14 76.8mm Cosworth wedge dome forged race pistons removed from a running A14 race engine. Includes all rings, pins and clips. $USD 200 per set of 4. A14 sized 19mm piston pin. Can be used in the A13 if you use the A14 rods. Can be used in the A12 with the A12A rods with the 19mm small end. If you buy a set of 4, you can buy additional pistons from the same Cosworth 76.8mm run for $USD 25 each.

Set of (4) 74mm Cosworth wedge dome forged race pistons removed from a running race engine. Built on the 19mm A14 piston pin, so to use in an A13 you need a set of A14 rods. To run in an A12 you need a set of the A12A rods with the 19mm small end. Includes all rings, pins and clips. $USD 200 per set of 4. You can buy additional pistons from the same Cosworth 74mm run for $USD 25 each.

SOLD (1) Aluminum water pump pulley, 21051-H5720. New in the box. $USD 50.

Set of (8) dual valve springs plus (8) aluminum spring retainers designed to work with the stock 8mm valve stems and keepers. $USD 150 for springs and retainers.

Set of (8) JB Racing roller tip rockers in the higher 1.65 ratio. [Stock is 1.5 ratio.] Works with the original rocker shaft and rocker towers, or will work with custom rocker towers. $USD 250.

Email is the best as I forget to check my mail here. PeterZekert "at" Juno "dot" com

Thank you, Peter

Attach file:

---

  1.65 rockers.JPG (78.20 KB)


  dual retainter spring.jpg (23.82 KB)