mmmmm you could probably do it with a set of rods forgies cams, a gt42 and 200hp shot of nos. chuck it up on the dyno at 40psi and then watch it go bang.....

Well then yes it probly is about right.big powers not cheap lol

Hi Datrotor thats 10g just for the motor,non off the above u have mentioned is included in the build.

You right bur you also don't get much for 10g these days 2000 turbo 2000 computer 1500 rad+intercooler 1000 exhaust.theres 6500 just to start with out and machining or internal part or labour.id be budgeting easy 15 for the motor for that power mcdat

if someone has already made one thats a different story. 500hp isnt to hard these days

I think they have led you On a bit.really don't think ull see 500hp out of 10g let alone 1000 with a ca

Ah ok i thought they where only around the 5g mark,apparently theirs a guy in Costa Rico that does them for the Ca.

billet block my ass. would cost 15g just for the block

Yeah i have looked at them and they do have reasonable prices,Im talking to John from JC racing in Sydney he can do me a billet block,billet crank with all the goodies for 10g and will produce 6-1000 hp.Very tempting but is this to much for a street car that will see the strip every so often?

if you have bald tires yes it will. Use slicks at the track gearbox blown. z32 box + adapter plate is good option if want to keep it 5 speed