|
|
Browsing this Thread:
1 Anonymous Users
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
No life (a.k.a. DattoMaster)  
Joined:
2007/1/22 23:06
From East New Britain, Papua New Guinea
Group:
Registered Users
|
C'mon benny spill the beans!!!!
Posted on: 2013/3/13 7:57
|
|
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
Home away from home  
Joined:
2011/4/15 3:17
From Melbourne
Group:
Registered Users
|
some very nice gear u got there guys.
fiass,
just a btw since i see u got fia/nismo mk63 calipers,u may already be aware.
one of the pros of this calipers is that they fit under 13inch rims,
but there are now kits for the fia/nismo mk63 4pot calipers to run 280mm ventilated disks from usual 260mm and still fit under 14inch rims!! This should be a considerable improvement for braking in track conditions.
its pretty much an adaptor bracket and the 280mm disks.im pretty sure someone could custom make this here in oz rather than importing from japan.They are available from yahoo japan.
Benny,
those tachos are very rare nowadays and fetch top dollars.il prob get a smiths tacho if unable to get a works tacho.
Posted on: 2013/3/13 1:06
|
|
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
No life (a.k.a. DattoMaster) 
Joined:
2002/6/14 7:24
From Sydney
Group:
Registered Users
|
 the iceberg is melting
Posted on: 2013/3/10 9:43
|
_________________
 ----------------------------------------- 1971 B110 Sedan GX Spec 1970 KB110 Coupe Track Car 1970 KB10 Coupe ----------------------------------------- S13 caliper b...
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
No life (a.k.a. DattoMaster) Joined:
2007/1/22 23:06
From East New Britain, Papua New Guinea
Group:
Registered Users
|
Tip of the iceberg hey benny??!
I have an A12T, A14E, A15E.
Posted on: 2013/3/10 6:07
|
|
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
No life (a.k.a. DattoMaster) Joined:
2002/6/14 7:24
From Sydney
Group:
Registered Users
|
nissan motorsport 10,000 rpm b110 tach.
Posted on: 2013/3/10 5:30
|
_________________
----------------------------------------- 1971 B110 Sedan GX Spec 1970 KB110 Coupe Track Car 1970 KB10 Coupe ----------------------------------------- S13 caliper b...
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
Home away from home 
Joined:
2011/12/10 0:26
From Wanneroo, Western Australia
Group:
Registered Users
|
My VB10 still runs the original 4:37 H145. Pickup is mint but it gets babied behind the A15. Not sure how uncommon they are tese days, but a mate has threatened to swap it out with his 3:9 while I'm asleep, so I'd put it in the desirable category. 
Posted on: 2013/3/10 1:32
|
|
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
Home away from home 
Joined:
2009/4/9 8:47
Group:
Registered Users
|
I have a gx bonnet, gx twin su's, Datsun radio blanking plate
Posted on: 2013/3/10 0:52
|
_________________
datsun a15 ute 
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
Home away from home 
Joined:
2009/11/23 10:01
From Newcastle nsw
Group:
Registered Users
|
1 h89 tall port head ported, valves double springs etc,
2 gx head titanium valves double springs big ports titanium retainers etc,
3 5 speed 60a gearbox
4 steering wheel Similar to gx and 1000gl wheel, but with tapered boss kit for 1200. ( I need the horn pad for this badly!!)
Lots of coupe bits a12 a14 a15 etc.
No really that rare maybe, but been hard to get, and valuable to me.
:)
Posted on: 2013/3/9 10:46
|
|
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
No life (a.k.a. DattoMaster) 
Joined:
2010/6/29 8:11
Group:
Registered Users
|
Thats a lot of wicked bit Nickmitty!
Shame all of those bits you sold! Didnt know there was that many 63A boxes in AUS :O!!!! Let me know when you want to sell one, my old man brought those from the wreckers in mint condition for $350 back in the day!
Ex works stuff is a dime a dozen too! You see the odd bit here or there rumour come up but thats about it.
Would love to see your stanza fiasss!!!
Posted on: 2013/3/9 7:01
|
|
|
|
|
Re: What Datto 1200 Parts have you got that Desirable- Rare- Ultra Rare |
|
Just can't stay away  Joined:
2010/7/13 12:21
From Western Australia
Group:
Registered Users
|
Late FIA group 2 L series head (reconditioned)
Works 76+ cam
FIA manifold with 50 phh Mikunis
Nismo headers to suit late FIA head
Titanium Nissan motorsport conrods
Works L20 8 bolt crank and flywheel
Works Enkeis
Halda twinmaster 2 with box and spare gears, t pieces, etc.
Works twin plate 7 1/4" paddle clutch
Rebuilt Option 1
Works struts with 4 pot brakes
Works laminated H190 rear axle housing with Nismo LSD (x2) and 4 pot brakes
+++ more
Posted on: 2013/3/9 6:31
|
|
_________________
1200 Sedan SR17VE + TURBO (Borg Warner twin scroll), 6 Speed, Brembos, Autronic SM4 ...coming together slowly.
Stanza rally car mostly ex works = FIA head, 50mm Mikunis, option one, works diff, 4 pot FIA calipers and vented disc all round, enkies, h...
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
Transfer
11.jpg (22.54 KB)
