Hi DD

earlier it did not close completely so i turned the housing clockwise and it opens completely and closes when the engine is cold too perfectly

thanks
regards
sumith

You don't want it to open quicker. You want it to just barely close all the way when cold.

Hi Guys

Turning the Choke Housing Clockwise will open the Choke Butterfly More Quicker

thanks
regards
sumith

It should require about five minutes. Until the engine reaches operating temperature.

Hi Guys

Just Tuned the Housing clockwise now it is opening completely, How long should it take to open the butterfly complete ? mine now takes maximum 5 minutes to open it ,is it too fast ?that time engine temperature is bellow the operating temperature, what is the average time it should take ?

thanks
regards
sumith

Try it both ways - only one direction will close the choke butterfly flap. Hold the throttle slightly open while you turn the housing.

Hi DD

I went through that article what i don't understand is that what is the door position of the carburetor at more choke and less choke situation , sorry for troubling

now my door position is similar to this position

http://s297.photobucket.com/user/ddgo ... _152143_DSC04286.jpg.html

so wanted to know whether to turn it clockwise or counterclockwise to make it open completely ?

thanks
regards
sumith

See Choke Adjustment

Hi Guys

i had to replace my electric choke since i have lost its coil spring on my b310 , i had metal one i found a plastic one (black color) with single wire, fixed it it is working but carb door opens about 80% ,definitely it should be adjusted, to which side should i turn my choke housing to open the door fully when hot is it clockwise or anticlockwise ?

Metal one used to get very hot when working but plastic one doesn't get hot but works is it normal ?

thanks
regards
sumith