yes exactly that. the one with the heater hose closer to the block. its definitely only got one connector as i pulled this same pipe of my A15 as i want to replace it. no connectors have been cut off or brazed over.

ive looked through alot of the drawings on the FAST software and cant seem to find this pipe. might just have to settle for the b120 pipe.

So you want the Suction Pipe with the heater hose connection close to the block? I've looked through the photos and diagrams but can't find one like it

It might be 21045-H8400, with the bottom connnector not visible in the photo (or with the bottom connector cut off and hole brazed over

left: H84 pipe
Unfortunately it was only sold in Japan on the twin carb A14 engine

Attach file:

---

  Close-in Heater Hose.jpg (31.83 KB)

Quote:If you have the end of a pipe machined to this diameter it wil fit right in

Here's A15 from Darren Wilson. It appears to have been cut short, I don't see the stock nipple-end

nippled end

Attach file:

---

  Darren Wilson A15.jpg (74.14 KB)

fyi, i replaced it with stainless steel pipe.

B120 used several variations over the years

Quote:

That might be a cut-down late B120 or Vanette pipe

Sorry I meant my first pic not yours. So the same as the b120 but with the curved heater outlets closer to the block.

the pipe in the first pic is the original B110 style (1970-1973 Datsun 1200)
Nissan part number 21045-18000

Quote:

Also was used by Datsun 1000

so no one knows the part number of the suction pipe in the first pic? or what model its from?

compared to this the heater hose connection is alot further from the block. im trying to replace my existing with the same one which is the same as the first pic.

Attach file:

---

  index.jpg (8.90 KB)