Really? I always thought that the taper on the ball joint would differ and you would need the matching steering arm?? well there you go!

on my coupe i didn't need different steering arms or outer tie rods? i running stanza control arms & ball joints with 240k struts, modified radius rods but stocko steering arms and tie rods

stanza or sunny give you an extra 15mm track either side, but require different steering arms, outer tie rod ends radius rods and ball joints but allow you to run different struts with better brakes.

whats the difference between stanza and 1200?i

get some stanza/sunny ones and i'll swap you, i want to change the front end to stanza.

Pretty sure theres only one left and its missing the front crossmember and the struts i think(could be wrong about the struts, i have the crossmember).
However, i have what you are after. Does 30 bucks sound alright? May trade datto parts if you have any spare.

hey mate ill give u a tip. Theres a wrecker at Wacol that had 2 1200 sedans about 2 months back. Just by chance they still might have lower control arms. I pulled the engine crossmember out of one of them and the control arms were still there, but anything could of happened since then. Heres there details.

WACOL Self Service Auto Parts 1156 Boundary Road Wacol Qld 4075 Phone: (07) 3271 2411

I reckon it's better if you go there instead of calling. Hope this helps

I got some in adelaide if you get stuck!

gday,does anybody in brisbane have a pair of standard front lower control arms to suit a datsun 1200 sedan?how much?