Hi DD

Thanks, they have perfect gauges, my shipping cost is more expensive than the gauge price ,down to sri lanka ....
i will see whether i can buy a local product matches with my specs

thanks
regards
sumith

The B110 and B210 fuel gauges have the Empty mark at around 73-88 ohms input. So buy an aftermarket "73 ohm" fuel gauge. Click here for some: Summit Racing 73-ohm fuel gauges

Hi DD

Yepe i was just thinking Went to hunt for one they have universal type ,they have 15 U$$ upwards, they don't specify exact Ohm Range on them will they work ?
on the manual it has 3 ranges written on it
0-90
100-180
180-280

something like this the guage doesn't specify exactly which ranage it is working,

thanks
regards
sumith

That is a B110 instrument panel (1972 version)

If the only problem is the fuel gauge, just buy a $40 aftermarket gauge?

Hi Guys

Went through Old part stores , Could Not find good condition b210 Dash Cluster , Found b10 or b110 round cluster in good condition but don't know whether it is interchangeable with my dash bolt ? ,
it is like this nipples out the glass

will that be suitable for mine ?

thanks
regards
sumith

Attach file:

---

  Dash.jpg (18.55 KB)

Yes, you can bolt square dash in place of round dash

Hi DD

I have round Dash Gauge Set , the if i need to replace the whole dash is it compatible with my b210 structure,(Can i put squre dashboard mn my b210 ?)

i have this dash http://datsun1200.com/modules/myalbum/photo.php?lid=3656

but almost every datsun b210 here has this type

https://www.google.lk/imgres?imgurl=ht ... hVSkY4KHTqcC5AQMwhLKCUwJQ


thanks
regards
sumith

Most older Datsun fuel gauge are compatible, maybe even some older Nissan
* Empty mark: 73-88 ohms input
* Full mark: 12 ohms

For aftermarket, see Fuel Gauges 73-ohm

Hi Guys

I checked it in every possible way , no good i think my gauge has gone bad, is there any aftermarket product which is compatible with b210 ? please give me an idea

thanks
regards
sumith

I would find the Body Harness to Dash Harness connector, pull it apart and test the yellow wire

1. Find dash harness Yellow wire in Dash/Body connector
2. Ground/earth this wire
3. turn IGN switch on and observe gauge:
* Gauge still dead. Check for loose wiring, at back of dash, or at dash wiring harness connectors
* Gauge works, indicates bad connection or damaged body harness wire