Hey guys im thinking about doing a quad carb set up on my a15. Any brand or model thats most commonly used and are easier to get your hands on? Any information, help and suggestions i would appreciate to have. thanks Nick

Try and find Keihn bike carbs the bigger the better.

This is what you are aiming for.

Next best thing to injection

thanks sidedraught for the reply yeah that set up would really good, is that your carb set up?

Only in my dreams, I did have a similar but far less expensive set up 15 years ago that I never should have sold.

If anyone is interested I have a set of
Quad Keihins 41mm (Honda Hurricane 1000)
They are VGC condition with cable
for choke and accelerator in the right
place for a datsun setup.
Just need to make a manifold that can
angle them as the flat slides sidey
has pictured and get them tuned to suit.
Im after 220 posted within Oz.



















Accelator cable provision picture above

D, any chance you could post that to malaysia? just curious :)

I believe it was D who created the quad carb setup that I had all those years ago.

Hey D that would be great to get hav been doing a bit of ebay searching on quad carbs and there is olny a few around but i would prefer if i could find some one with a complete set up willing to sell with the manifold as well. Does anyone know of someone?

There is a dude from California currently selling a setup on here that might suit this.

http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=52880&forum=2

Bakat, Im sure you can get them cheaper there?

Yes Andy I did a crude job on that old manifold
but using the 36mm ones back then seemed to flow
as good as dcoe40s on my a16 before spliting bores.