User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





rotary 1200 ute project....SOLD!!!!!!!!!!!
Quite a regular
Joined:
2005/3/9 11:20
Group:
Registered Users
Posts: 53
Offline
Unfortunately iam moving overseas and cant finish my 1200 Ute project. I was planning on running a 13B turbo Bridgeport in it with a series 5 RX7 Turbo gearbox. The Ute currently has a 12A Bridgeport and a s5 turbo box behind it (not being sold with engine or gearbox). The engine mounts are complete but are only tack welded in place, the just need to be stitched on. The transmission tunnel is currently cut out and needs a larger one folded up or a larger one from another car welded on and a gearbox crossmember fabricated (the standard tunnel is included and could be re welded in, rotary mounts could also be removed if you wanted to do a CA conversion). The rear wheel tubs have been cut off and i was going to use a 1/4 of a 250Litre drum and weld them in place, this isn't a hard or costly thing to do. The drip rail for the roof has been cut off and needs grinding back, the rail around the tray has also been remove and sheet metal has been welded on top. It has a Datsun diff with standard brakes and reset leaf springs, has 2 tray doors, battery has been relocated to the tray, has one (very dusty) drivers race bucket seat and a late model Mazda RX7 passenger seat which require fitting, stanza struts and the large Gridlock brakes, all tie rod ends and ball joints and idler arm replaced, 15inch Nissan rims with spare good rubber, most panels in primer for protection, spare brand new bonnet, spare guards, new sedan grill (polished metal one), spair front stone guard panel, commodore radiator (it was using this previously and can be used for a rotor). This has lots of potential and someone will get a bargin. I wont have any more pics of the body up till next week, Ill be after any offers and if it doesnt sell in 4-6 weeks ill put it on ebay. Sold in as is condition. cheers all.
http://i139.photobucket.com/albums/q293/joshrotor/datsunute003.jpg
http://i139.photobucket.com/albums/q293/joshrotor/datsunute002.jpg
http://i139.photobucket.com/albums/q293/joshrotor/datsunute001.jpg
http://i139.photobucket.com/albums/q293/joshrotor/datsunute004.jpg
http://i139.photobucket.com/albums/q293/joshrotor/datsunute005.jpg
http://i139.photobucket.com/albums/q293/joshrotor/datsunute006.jpg
http://i139.photobucket.com/albums/q293/joshrotor/datsunute007.jpg

Posted on: 2007/10/14 11:44
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
No life (a.k.a. DattoMaster)
Joined:
2006/5/5 4:46
From perth airport
Group:
Registered Users
Posts: 5432
Offline
Open in new window


Open in new window

Open in new window

Open in new window

Posted on: 2007/10/14 12:09
_________________
perth airport parking
Datsun 1200 ute A14
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
No life (a.k.a. DattoMaster)
Joined:
2004/10/13 6:13
From penrith,sydney,aus
Group:
Registered Users
Posts: 1013
Offline
where abouts are you located???

Posted on: 2007/10/21 5:40
_________________
2 door 1200 sedan project l20b stroker
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
Not too shy to talk
Joined:
2007/9/10 1:18
From Sydney
Group:
Registered Users
Posts: 25
Offline
how much ???

Posted on: 2007/10/21 7:21
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
Quite a regular
Joined:
2005/3/9 11:20
Group:
Registered Users
Posts: 53
Offline
Sory im in Maroochydore QLD. Just after offers atm but it will be sold by the end of NOV. ill post up body pics when i get back from holidays.

Posted on: 2007/10/21 11:36
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
Quite a regular
Joined:
2005/3/9 11:20
Group:
Registered Users
Posts: 53
Offline

Posted on: 2007/10/27 5:47
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
No life (a.k.a. DattoMaster)
Joined:
2005/8/8 9:38
From The garage, NZ
Group:
Registered Users
Posts: 1922
Offline
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Posted on: 2007/10/27 8:12
_________________
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
Quite a regular
Joined:
2004/4/22 9:34
From noosa QLD
Group:
Registered Users
Posts: 57
Offline
hey mate,iv sent you a pm...can you pm me your contact number please...

Posted on: 2007/10/28 5:25
_________________
old dattos dont die....they just get rebuilt and thrashed
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
Quite a regular
Joined:
2004/4/22 9:34
From noosa QLD
Group:
Registered Users
Posts: 57
Offline
hey buddy please get back to me i want to buy this thing

Posted on: 2007/11/1 9:23
_________________
old dattos dont die....they just get rebuilt and thrashed
Transfer the post to other applications Transfer


Re: rotary 1200 ute project
Home away from home
Joined:
2006/3/15 9:46
From Gold Coast
Group:
Registered Users
Posts: 323
Offline
he's gone away, he will be back on the 5th

Posted on: 2007/11/1 9:39
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]