I am having to redo the rear drum brakes on my "new" coup. I am having difficulty finding wheel cylinders. Both Napa and CarQuest do not
have any available.

Does anyone have a source? OR

What is an easy bolt on rear brake motifications; What model will fit the rear axle?

Thanks, Ed

dont TRX series 2 rear disks bolt right on?

just a thought...

Linc.

wheel cylinders from later b210
should fit the 1200. They have a larger bore, which will increase braking power.
Bob

Thanks for the hint. I will check with my local supplier.

I found a place online that appears to have some stock and reasonable prices. Also some suspension parts
that might be helpful.
http://www.benzspring.com/

Try a PL510 (1600) wheel cylinder. They are a little bigger, but bolt right on.

By: datsun1200_510_521
Date: 12/21/01 10:13 pm

I am having difficulty finding wheel cylinders. Both Napa and CarQuest do not have
any available.

What is an easy bolt on rear brake motifications; What model will fit the rear axle?

I used those bigger cylinders in my sedan. They bolt straight in. BUT!!! They do have more braking power and tend to lock-up before the stock front brakes in panic or hard
braking on the street. This is the same as pulling the e-brake and spinning in circles. you may wish to look at a brake bias valve also.

try www.expressautoparts.com/