User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Wtb t25/28 inlet pipe
No life (a.k.a. DattoMaster)
Joined:
2008/6/15 9:11
From Melbourne
Group:
Registered Users
Posts: 4504
Offline
Hi I'm after a straight inlet pipe for a t25/28 turbo in 2.5 or 3 inch, so it's the bit that bolts to the front of turbo then connects to afm ect, I'm not after a stock one as I've got one just arter a straight out one I can make fit my setup
Cheers nick

Posted on: 2012/12/26 10:34
_________________
Car free
Transfer the post to other applications Transfer


Re: Wtb t25/28 inlet pipe
Home away from home
Joined:
2010/1/31 10:26
From Melbourne
Group:
Registered Users
Posts: 660
Offline
I don't have one mate but make one to suit your application. Get the flange for front of turbo and a pipe and if needed tack it all up and get an engineering place to weld it all up. Suit your car and your application

Posted on: 2012/12/26 12:22
_________________
For a cheap car these datos can get super expensive....!
All the bits for my ute have been acquired, I only need time and a panel beater/painter! Anyone able to help
Transfer the post to other applications Transfer


Re: Wtb t25/28 inlet pipe
Home away from home
Joined:
2009/10/10 4:23
From Logan, QLD
Group:
Registered Users
Posts: 389
Offline
I don't know if it works as well for ca's but on rb30et's I used to put the afm right before the throttle body, It gives better results incase of cooler pipes blowing off, did not seem to affect the fuel ratio's at all.

Posted on: 2012/12/26 20:14
Transfer the post to other applications Transfer


Re: Wtb t25/28 inlet pipe
No life (a.k.a. DattoMaster)
Joined:
2008/6/15 9:11
From Melbourne
Group:
Registered Users
Posts: 4504
Offline
I still need to find a flange 1200 project u got one? I'd make one for sure if I could get all the stuff

Posted on: 2012/12/26 22:26
_________________
Car free
Transfer the post to other applications Transfer


Re: Wtb t25/28 inlet pipe
Home away from home
Joined:
2010/1/31 10:26
From Melbourne
Group:
Registered Users
Posts: 660
Offline
Is it a two bolt front your after mate? I don't have one but if you hit any performance/turbo place online or even Maddat may be able to help. I can't help you out but welding it I may be able to help you

Posted on: 2012/12/27 0:44
_________________
For a cheap car these datos can get super expensive....!
All the bits for my ute have been acquired, I only need time and a panel beater/painter! Anyone able to help
Transfer the post to other applications Transfer


Re: Wtb t25/28 inlet pipe
Just can't stay away
Joined:
2010/5/29 22:59
From stinking hot cairns
Group:
Registered Users
Posts: 120
Offline

Posted on: 2012/12/27 1:32
Transfer the post to other applications Transfer


Re: Wtb t25/28 inlet pipe
Home away from home
Joined:
2010/1/31 10:26
From Melbourne
Group:
Registered Users
Posts: 660
Offline
There you go. Also get a new actuator from them guys and oils lines if needed. Not a bad company.

Posted on: 2012/12/27 2:32
_________________
For a cheap car these datos can get super expensive....!
All the bits for my ute have been acquired, I only need time and a panel beater/painter! Anyone able to help
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]