User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Building my Coupe
Just popping in
Joined:
2002/10/28 2:26
From Surrey B.C Canada
Group:
Registered Users
Posts: 20
Offline
Well I bought this car a couple of years ago. When I picked the car up I though it was a bit better than it was . When I got home I found a few problems that were going to stall my building of it, to say the least I was a bit bummed. I lucked into a stash of parts and a bit of time and save a bit of money so I got cracking.
These pics are of when I bought the car.
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Posted on: 2018/1/11 6:31
Transfer the post to other applications Transfer


Re: Building my Coupe
Just popping in
Joined:
2002/10/28 2:26
From Surrey B.C Canada
Group:
Registered Users
Posts: 20
Offline
When I got home ,I tucked the car in my brother inlaws race trailer and kinda left it there. When I got to starting on the car I discovered the car had been hit in the front end. I tried to figure out what direction I was going to go .It turned out I would have to hold off a bit to find the parts and save more money, but found a usable front clip .I found a guy to put the clip on( I just didn't have the place to do it )
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

I had them sand blast , and clip the front end at the shock towers. They gave it a quick primer and shot of paint to clean it up .Then it came back to me for the rest of the body work.When it was there they found some more damage, and I had to decide( tried to pay my way out of it ...but it was more than I could bare to pay ...and I figured what the hell,Ill do it myself.)
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Posted on: 2018/1/11 6:48
Transfer the post to other applications Transfer


Re: Building my Coupe
Just popping in
Joined:
2002/10/28 2:26
From Surrey B.C Canada
Group:
Registered Users
Posts: 20
Offline
When i got the car back to the house , my brother inlaw let me keep it there in his shop.....I figured he's letting me use his shop I'm gonna try and get as much done as I can.Like I said I saved and got lucky with a stash of parts....nos fenders and apron and some other stuff as well as buying all new suspension parts and brakes.
Then I got on fixing 2 sections of floor that had super minor rust ....
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Posted on: 2018/1/11 7:04
Transfer the post to other applications Transfer


Re: Building my Coupe
Just popping in
Joined:
2002/10/28 2:26
From Surrey B.C Canada
Group:
Registered Users
Posts: 20
Offline
Stripped the roof and quarters.....I found the damage they were talking about ...shi I ran into crappy weather ( I was waiting on a part car for most of that summer that never happened)
I ran into the fall weather ...It flash rusted the one quarter I started , i put it away for the fall
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

I stripped and checked the rear valence for rust....thank god , i din't find any ...just a little filler needed..I also did the trunk as well
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Then I found this nightmare...It looked small until I started digging in
Open in new window

Open in new window

Posted on: 2018/1/11 7:24
Transfer the post to other applications Transfer


Re: Building my Coupe
Just popping in
Joined:
2002/10/28 2:26
From Surrey B.C Canada
Group:
Registered Users
Posts: 20
Offline
After already sticking way to much money into the car ....what the hell , I found an NOS quarter panel and replaced the whole side.
Then I found damage in the door , so I bought an NOS door skin. So the passenger side is NOS.
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Posted on: 2018/1/11 7:34
Transfer the post to other applications Transfer


Re: Building my Coupe
Just popping in
Joined:
2002/10/28 2:26
From Surrey B.C Canada
Group:
Registered Users
Posts: 20
Offline
After a #OOPS# load of poly and blocking and a bunch of prep crap....finally I got her into color.
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

I borrowed a booth , and shot my first paint job. It needs a cut and buff but for the first one it looks pretty good.
Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Open in new window

Posted on: 2018/1/11 7:42
Transfer the post to other applications Transfer


Re: Building my Coupe
Home away from home
Joined:
2007/6/23 9:19
From WEST AUSTRALIA
Group:
Registered Users
Posts: 404
Offline
EDIT

Posted on: 2018/1/11 11:51

Edited by KULH on 2018/3/13 23:33:47
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]