Browsing this Thread:
1 Anonymous Users
|
|
Re: how do you convert auto to manual ?? |
|
Home away from home  
Joined:
2002/11/7 4:07
From Perth, Australia
Group:
Registered Users
|
Hi Holly
You'll more than likely need a new tailshaft, you'll definitely need a clutch assembly including the flywheel(Unless you included it when you said you had the gearbox), you'll more than likely need to make a new gearbox mount as well. I recently changed my 120Y from auto to 5 speed and that was what I had to do.
As for sourcing, wreckers are your best bet.
Order of Assembly ?
Remove auto box and tailshaft, incl all wiring (make note of the cables used on the reversing switch) and the shifter console inside the car.
Fit new manual box/ clutch/ flywheel and tailshaft. then the fun begins.
Remove the brake pedal assembly (you'll prob need to undo the steering column and loosen off the brake master cylinder and replace it with the clutch/ brake pedal assembly.
Install clutch cable and reinstall brake light pin switch, etc.
That's the quick and dirty answer. I'm sure there are more posts out there that can help.
Hope this helps you !
Posted on: 2004/3/8 7:03
|
_________________
1974 120Y Coupe 40 thou overbored A14 32/36 DGV Weber 5 Speed Gearbox New Interior (in the making) My website
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
