Folks

I read the info on carbys in the tech section about SUs. I want to put twin SUs onto an old round port a12, the one with the dizzy at the front. I emailed redline and they said they dont make one, but the tech section suggests that they have the same bolt pattern as the sidedraft webbers.

This is the listing on the redline page
NISSAN - DATSUN
PART NO. 12-3060 Datsun (Nissan) 1000, 1200, 120Y, 140 (A10, A12, A12A) Manifold designed to accept 2 x 40 DCOE Weber Carburettors.
LINKAGE KIT P/NO. 42-2560

http://www.redlineauto.com.au/manifold.html

Question is, will this manifold kit fit my SU's , which came off a 1600, and bolt to the round port a12 head that I have, and are they likely to fit under a 1000 bonnet?

and as I have some headers fitted as well, wiull they present a heat problem or get in the way?? they are cheap hurrican headers for a 120y made to fit


I also justfound this web page, but its on the US I think. They sell lynx manifolds for twin SUs but the I dont understand the jargon that descibes the mainfolds
http://www.carbs.net/LynxManifolds.asp

1200
M041 MANIF DATSUN 1200 1 X DCOE/DHLA
M042 MANIF DATSUN 1200 2 X HS4 SU
M137 MANIF DATSUN 1200 2 X HS4 SU

thanks inb advance