Browsing this Thread:
1 Anonymous Users
|
|
Re: sunny 5 speed into 1000 |
|
Home away from home  
Joined:
2003/9/4 4:47
From Beautiful Sunny (sic) Melbourne
Group:
Registered Users
|
I have a 60A gearbox in a 1000 coupe. It fits in the transmission tunnel but only just! I had to chop a hole in the floor to give clearance for the clutch operating arm to work and make up a "bulged" metal cover to screw and glue over the hole. If yoy figure out where you need the clearance for this (and the reversing light switch which is also a pretty tight fit) you can beat a bit of a bulge into the floor at the appropriate position. This means fitting the gearbox up and marking where you need the clearance then removing and refitting again after you've done a little panel beating. You'll also have to modify the rear gearbox mount.
Posted on: 2004/4/19 9:47
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
