Browsing this Thread:
1 Anonymous Users
|
|
Re: Oil pressure? |
|
Not too shy to talk  
Joined:
2004/2/28 6:23
From Christchurch NewZealand
Group:
Registered Users
|
If you have checked all the obvious things. I would then possibly check the presure relief valve and spring in your oil pump. Looking at the pump on the mtr, this is on the left hand side under a 17mm blanking cap. undo this and check that the spring isin't damaged and that the plunger moves freely. This won't find the cause for the drop, but if all looks ok, you could put a small 1mm thick washer between the spring and cap. By doing this it will increase the resistance on the spring and increase oil psi. If that has no effect i would then maybe have a look at the pump its self.
Posted on: 2004/7/27 6:41
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
