Browsing this Thread:
1 Anonymous Users
|
|
Re: OK Mr wrecker, this is what i need, |
|
Home away from home 
Joined: 1999/3/11 4:57
From Sydney
Group:
Registered Users Contentmaster
|
I found when visiting a wrecker u never get everything u want anyway. But here goes. Get some stanza lower control arms. Get some stanza castor rods (machine them but). Get the late model struts (1980+) so u can use a 200b disc(dont get the springs if u can help it). Get the stanza steering arm piece. A 1200 strut top. Um. I think thats all u need from the wreckers. O Yeah, i would also look at upgrading the sway bar to a 120y unit. They are 22mm instead of 19mm. After that u will have to visit Mr Repco and get some lower ball joints. And possibly some new steering ball joints while your at it. Also some brake pads for whatever calipers u are using. New bearings aswell... Now visit Mr Pedders and get some new springs and shocks. Also get some new rubbers for the castor rods and sway bar. Now just get some new 200b disc's and hilux 4 spots and u will have a 9.5" solid disc setup with 4 spots and that should make a dramatic improvement to the handling, stoping and will be lower to the ground..... I hope this helps. But can someone else confirm that i've gone thru all the bits?? Scott Davo
Posted on: 2000/11/3 5:13
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.