Browsing this Thread:
1 Anonymous Users
|
|
Re: Vanette H190 rear diff |
|
Home away from home  
Joined:
2003/12/26 13:41
From South East QLD
Group:
Registered Users
|
There is lot of Variations of H190s ,, with different carrier off sets.....the main classes of offset are "A" "B" OR "C" then the newer H190s have 12mm ringear bolts and early ones
are 10mm or 3/8 unf bolts .. Most aftermarket LSDs are for the 12mm ring gear bolt.. SO you might be in luck ..and you would need a "B" carrier
Isent a fax to with my dimensions of my carrier to place in the USA for a 4.11 metal centre
{different place
to andrews Brand and web page ]
and they claimed that the latter lsds would not fit the earlier carrier .. but didnt really say why only the offset was different .. and they listed 3 different carrier off sets .. Dont think that the "A" means for a ALLOY CENTRE DIFF as it dosent ... AL means ALLOY Centre And ML means Metal.. Iam after a LSD center as well ..
Posted on: 2005/3/3 10:31
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
