Browsing this Thread:
1 Anonymous Users
|
|
Re: Greetings all.... need to ask something |
|
Home away from home  
Joined:
2004/12/8 0:22
From Warburton vic
Group:
Registered Users
|
Have a look at simple things like.
Is the timing set properly & is it getting full advance the timing mark should move to about 20 degrees with the vac advance disconected & vac hose blocked.
The exhaust could be restricting it.
If the exhaust is old it could be a bit blocked.
Have they used an A12 carby on the A15?
Also is the vac advance conected if it is check that it is working buy checking if there is vac getting to it then take off the distributor cap conect a peice of hose to it & suck on it you will see the base plate in the distributor move.These are some simple thing to check first before spending money.
Also if it was a second hand motor do a compression test replace the spark plugs if they wearnt already changed whenyou did the job. And it wouldnt hurt to check the tappets.
Posted on: 2005/3/23 22:59
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
