Browsing this Thread:
1 Anonymous Users
|
|
Re: rose jointed caster bars ? |
|
Home away from home  
Joined:
2000/5/6 6:12
From Wellington New Zealand
Group:
Registered Users
|
When adding rose joints it is important to retain the original pivot point of the mount you are replacing. If you use a rose joint on the caster rod you really should remove the original front mount and fabricate a new mount further forward. To keep things a little more simple I use spherical bearings to enable the use of the factory front mount. By using the rose joints and normally pulling the strut forward for more caster leaves you with a short caster rod swinging in altered geometry which can bind and snap.........
Posted on: 2005/5/22 23:45
|
|
_________________
1200 coupe 1400 GX 5 speed
1200 coupe LHD peripheral port 12A rotary.
1200 ute
Sunny 310 SGX.
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
