Browsing this Thread:
1 Anonymous Users
|
|
Re: Help me with my engine Build |
|
Home away from home  
Joined:
2005/1/12 7:11
From Newcastle (NSW)
Group:
Registered Users
|
You haven't mentioned what the engine will be used for! I would hope it is a race engine (not for street use) with a cam that big. Thats a 320 degree duration cam and will only provide a benefit over smaller cams when the engine is reving 5000ish rpm upwards. If you shifting gears at 6000rpm for instance, you would be much quicker with a smaller cam.
You must set up your compression ratio. You mentioned you have shaved your head to the max. Have you cc'd the chambers ??
Twin dellortos with 32mm chokes should be good for only 6000ish rpm max. Thats perfect for a hot street motor and will give resonable low end performance.
You can bore most blocks safely to 78mm (expect if the block has heavy corrosion) and there are plenty pistons to suit.
HP??? Need more info....
Posted on: 2005/10/13 4:54
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
