Browsing this Thread:
1 Anonymous Users
|
|
Re: Distributer problem - Need help! |
|
|
Just popping in
Joined:
2005/11/10 0:56
From west sydney
Group:
Registered Users
|
Take the dizzy out, & take no. 1 spark plug out, turn the engine over by hand untill no. 1 piston is at the top, & the timming mark on the pully is at top dad centre, then put the dizzy back in so that the rotor button is pointing towards the no. 1 lead on the dizzy cap, try & start it, you cant hert anything, if it backfires badly (make sure the air cleaner is on) take the dizzy out (as it's 180deg out) turn the engine over one full turn & install as above. that gets you back to the original problem.
Try taking fuel line off the carb & get some one to crank it for you & see how much fuel is getting through, could be stuffed pump or an obsruction is the line or tank.
Trev
Aus
Posted on: 2006/1/6 0:09
|
|
_________________
nothin revs like a GX
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
