Browsing this Thread:
1 Anonymous Users
|
|
Re: A14 Forced induction build |
|
Home away from home  
Joined:
2005/12/7 4:37
From Bendigo, Victoria, Australia.
Group:
Registered Users
|
the 9:1 in the standard A14 (i hope thats right??) is fine for the 7psi max u have. note, the bigger crank in the A15 will increase the compression ratio. allow for this before you buy one.
if you want to keep something around the standard comp ratio then use a thicker head gasket (about 2mm).
other than that, the bigger valves and a good port and polish of the standard A14 head will work a treat!
other than that, i think JTS do something for these engine in regards the head. but im not sure.
Posted on: 2006/2/22 6:11
|
|
_________________
"Like a Rolling Stone"
Bob Dylan
New Daily: <<<<Now For Sale.
1972 B110, 13" Bathurst mags, airbrus
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
