i have just finished my audio install on my 1200 ute, and i am pritty happy with the results. i have been reading a few old posts on here of other peoples install jobs and i personaly think that this would have to be by far the easiest way to install a sub in your ute if thats what u wanna do. i made and covered my own door cards and made my own new kick panels. the 1200 doors are great because they have lots of depth and the quarter windows, so installing the subs was not difficult at all. my system is made up of very few components and is not a very complicated system. i run two dual voice coil, 200 wrms at 2 ohms, 8" diamond audio subs in my doors, and a pair of 6.5" 75wrms focal component slits in my kick panels. and to power the whole lot 2 300wrms 4way pioneer amps which are bridged and each power one set of speakers. my amps are my weak link of my system, they are alright but are pioneer so they are not of the best quality. my system has lots of power and plenty of bass, the sound is of top quality with deep lows and amazingly crisp and clear highs.