Browsing this Thread:
1 Anonymous Users
|
|
E brake question. |
|
Home away from home  
Joined:
2005/10/12 0:34
From Canada, B.C , Richmond
Group:
Registered Users
|
Hi there, I was just wondering about this and cant seem to find it in the Shop Manual so i thought i would try here.
My E Brake has never worked, when i pull up the handle the car will continue to roll backwards. I took a trip under the car and saw that the E break cable could be tighted by tighting 2 nuts. After tightening these 2 nuts I pulled on the handle again to find that the car now no longer rolls.
My question is, Since the cable has been tightend and the hand brake is in the release posistion, the E brake mechanism near the drums are not in full release posistion becasue of the tightend cable. Haveing said that, will that throw off my Rear and Front breaking? (becasue the rear is alerdy tensiond abit by the handbrake)
Sry if this is confusing to read =(
Posted on: 2006/5/22 19:14
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
