here is what I did, very easy and cheap,


parts.

Disk........: VW Caravelle vented 5 hole 114PCD
Disk mods....: none if you have 15" rims, 10mm smaller on disk diameter for 14" rims
3 holes to handle the 3 studs that don't have holes. one of the existing holes can be used. rim spacing as required......

Calipers.....: Toyota Camry single pot floating.
Caliper mods....: none, just custom made hydrolics....

convertor bracket....: Custom, to use 2 of the 4 holes on the stub-flange....

the calliper can be mounted leading or trailing, depending on where the bleed nipple is situated. Makes for a nice and well thought-up conversion... and it WILL stop you on a dime....